MAPEI DURESIL EB
Abrasive chemicals protection paint; We are sellers of chemical resistant anti-acid resin paint for protection of surfaces against chemicals such as sewage treatment plants, cisterns and concrete sewer pipes in contact with abrasive or corrosive chemicals such as acids, alkalis, hydrocarbons, detergents and sewage.
Anti-acid | anti-corrosive Duresil EB is a two-component epoxy modified paint based on hydrocarbon resins and special admixtures manufactured to a formula developed in the MAPEI Research Laboratories.
Once it hardens completely, Duresil EB protect objects from chemical attack making them resistant to acids, alkalis, salts, oils, and hydrocarbons, The hardened Anti-acid Duresil EB film is designed for contact with sewage and can be used for the protection of sewage treatment tanks and sewer mains and in industries or production plants where strong chemicals are in use.
Anti-acid Duresil EB from Mapei is also resistant to frost and sunlight, and creates a water vapour barrier.
Duresil EB complies with the principles defined by EN 1504-9 standards (“Products and systems for protecting and repairing concrete structures: definitions, requirements, quality control and conformity assessment. General principles for the use of products and systems”) and the requirements of EN 1504-2 coating (C) according to principles PI, MC, RC and IR (“Concrete surface protection systems”).
ANTI-CORROSION | ANTI-ACID PAINT APPLICATION AREAS
· Anti-acid protection of sewage treatment tanks.
· Anti-acid protection of sewer mains.
· Coating of recycling tanks for oils and hydrocarbons.
· Safety reserve tanks.
· Drain wells.
· Anti-corrosive coating of sandblasted steel surfaces.
· Protection of reinforced concrete and steel exposed to salt air.
· Protection of the outer face of concrete joists on bridges and viaducts.
Duresil EB can be applied using conventional techniques, brush, roller or spray, in at least two coats. Wait from 6 to 24 hours between coats, depending on ambient conditions.
If the viscosity must be lowered to facilitate spray applications, dilute Duresil EB with 5-10% of nitrosolvent or white spirit. If Duresil EB is used to protect the outer face of concrete joists on bridges and viaducts, the product must be applied at a rate of at least 2 kg/m² and distributed in several layers on the surface using traditional techniques or with a squeegee. Immediately after applying Duresil EB, the surface must be sprinkled with dry sand with a suitable grain size to help the next layer form a better grip.
Flexo Concepts Ltd. is seller for anti-corrosive | anti-acid paint in Nairobi Kenya.
